ABSTRACT
Most often, the printing of very important and computer reports have been stopped midway owing to some minor faults on the computer/printer system. At times, due to the complexity of the faults some maintenance find it difficult beginning to perform detailed diagnosis due to lack of specialized equipment, some of which are available only to a few big firms due to their high cost of acquisition.
As the case may be, some of those faults may be such that will require a very fundamental knowledge of printer maintenance, making use of minor tools. Once the actual causes are identified.
This project EPERT SYSTEM ON TROUBLE SHOOTING AND MAINTENANCE OF INKJET PRINTER shooting and maintenance information for noncomputer/printer engineers.
TABLE OF CONTENT
TITLE PAGE
CERTIFICATION
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
ORGANISATION OF THE WORK STUDY
TABLE OF CONTENT
CHAPTER ONE:
INTRODUCTION
1.1 BACKGROUND OF THE STUDY
1.2 STATEMENT OF PROBLEM
1.3 PURPOSE OF STUDY
1.4 SIGNIFICANCE OF THE STUDY
1.5 AIM AND OBJECTIVES
1.6 SCOPE OR DELIMITATION
1.7 LIMITATIONS OR CONSTRAINTS
1.8 ASSUMPTIONS
CHAPTER TWO:
LITERATURE REVIEW
CHAPTER THREE:
DESCRIPTION AND ANALYSIS OF EXISTING SYSTEM
3.1 FACT FINDINGS METHOD USED
3.2 OBJECTIVE OF THE EXISTING SYSTEM
3.3 INPUT, PROCESS AND OUTPUT ANALYSIS
3.4 INFORMATION FLOW DIAGRAM
3.5 PROBLEMS OF THE EXISTING SYSTEM
3.6 JUSTIFICATION OF THE NEW SYSTEM
CHAPTER FOUR:
DESIGN OF THE NEW SYSTEM
4.1 OUTPUT SPECIFICATION AND DESIGN
4.2 INPUT SPECIFICATION AND DESIGN
4.3 FILE DESIGN
4.4 PROCEDURE CHART
4.5 SYSTEM FLOW CHAR
4.6 SYSTEM REQUIREMENT
4.7 PROGRAM DESIGN
4.8 PROGRAM FLOW CHART
4.9 PSUDOCODE
4.10 SOURCE PROGRAM
4.11 TEST RUN
CHAPTER FIVE:
RECOMMENDATION AND CONCLUSION
REFERENCES
CHAPTER ONE
INTRODUCTION
The impact of engineering age is tremendous and its arrears of application are increasing geometrically. It is believed that the information revolution will radically change the nature and quality of engineering work in the near future.
Some of the most exiting arrear of the information technology includes.
Office automation and computer publishing
Justintime J.I.T production techniques to reduce cost and improve quality.
Electronic shopping and electronic funds transfer
Computer controlled commuter train system
Decision support system DSS that facilitate real time control of making under battle field condition typically characterized by uncertainty
Computer aids to the handicapped including intelligent implants and experts for medical diagnosis.
Computer aids instruction CAI and aided manufacturing.
Due to all these mentioned arrears of computer application and more, computer has now been accepted and used by so many organizations, by individuals for various purposes. It is believed that computer is an agent, which improves productivity, enhances competition.
ABSTRACTThis study was carried out to verify al the manual processes involved in generating students transcript and...
Continue reading1.0 INTRODUCTION1.1 BACK...
Continue readingABSTRACTOnline examination systems are being used by an everincreasing number of institutions to help reduce time def...
Continue reading