DESIGN AND CONSTRUCTION OF INDUSTRIAL BATCH COUNTER

CHAPTER ONE

INTRODUCTION

The industrial batch counter is an electronic and electricaldevice that handles the counting and controls the flow of individuals using an automated slide door that allows access only when the administrator permits. The technique involved in the design is a simple sensor unit that opens and closes the door when someone obstructs the light path. These parameters can be used to determine when someone has moved in or out of the conference hall for instance. The light sensing type involves monitoring the unit with photon or optical devices; this consists of the encoder transmission path or the source of energy and the decoder receiver unit that converts the light intensity to electrical signal. An LED emitter, combined with a photo detector Light Dependent Resistor, photo transistor or infrared sensing diode in proximity, form a very useful object called optocoupler or optoisolator. When the opto coupler is obstructed, the door opens and the display shows an increase or decrease of individuals in the room depending on the path followed. This project report creates a greater picture of the industrial batch counter.

1.1 THE AIM AND OBJECTIVES OF THE PROJECT

The aim of this project is to demonstrate a smart device that counts the number of people inside a conference hall; and prevents people from entering once the room has reached its capacity.

1.2 JUSTIFICATION OF THE PROJECT

The need for counting the number of persons inside the conference hall is for statistical record, which will help the conference hall management take a proper account of people; and as well, control the conference hall capacity from being over populated.

1.3 THE SCOPE OF THE PROJECT

This project covers the features of the capacity monitor, the hardware description, the use of transistortransistor logic and microcontroller, how the system works and its applications.

1.4 THE PROJECT REPORT ORGANIZATION

This project report is organized into five chapters. The first chapter covers the introduction, aim scope and justification of the project. The second chapter talks about the technology behind the project, the description of the microcontroller, as well as the working principle of the project. Chapter three covers the methodology of the project. Chapter four discusses the designing and construction of the project, as well as other components used in designing this project. Chapter four also talks about the testing of the individual components and packaging of the project. And lastly, chapter five summarizes and concludes the project.